4 Fe Port Epon WiFi ONU, 2 VoIP ONU
|FOB Price:||US $86 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $86/ Piece|
|Production Capacity:||2000PCS Per Month|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal|
- Model NO.: VOIP ONU
- Function: Signal Transmitting Device
- Condition: New
- Front Interface: Pon Port(Sc Connector)
- Receiving Senstive: -26dBm
- Speed: 1.25gbps Symmetry at The Upper and Lower
- MOQ: 1piece
- Trademark: SOFTEL
- Specification: CE; ISO9001
- HS Code: 85176229
- Type: Optical Network Unit(ONU)
- Certification: CE
- Application: FTTX, FTTH, FTTB
- Management: Web or Software
- Operation Wavelength: up-Tx:1310nm, Down-Rx:1490nm CATV:1550nm
- Maximum Splitting Ratio: 1:64
- Power Supply: 12V Dcv
- Transport Package: Packed with Polyfoam, Outer Packed with Brown Box
- Origin: Hangzhou, Zhejiang, China
2.1 Installation Requirements
Installation Environment Requirements
HGU equipment must be installed in the interior, and to ensure the following conditions:
Confirmation at the HGU installation at sufficient space to facilitate cooling machine.
HGU suitable working temperature of -5 º C ~ 55 º C, humidity 10% to 90%.
Device workplace should avoid radio transmitters, radar stations, and high-frequency interference from power equipment.
Installed on the desktop
Place the machine on a clean bench, this installation is relatively simple, you can observe the following operation:
Ensure the smooth workbench.
Around the device enough space for heat dissipation.
Mounted on the wall
Observation HGU equipment chassis two cruciform recess, in accordance with the position of the groove, installed two screws in the wall.
The original selected two mounting screws gently snap into recesses aligned.
Slowly let go, so that the device under the support of the screw hanging on the wall.
|Power(1)||PWR||ON||The device is powered up.|
|OFF||The device is powered down.|
|Optical signal (2)||LOS||Blink||Device does not receive optical signals.|
|OFF||Device has received optical signal.|
|Registration(3)||PON||ON||The device is registered to the EPON system.|
|OFF||Device is not registered to the EPON system.|
|Blink||Device is registering.|
|WAN(4)||WAN||ON||WAN is effective.|
|OFF||WAN is ineffective.|
|WIFi||ON||WiFi turn on|
|OFF||Device is power off or WiFi turn off|
|Blink||WiFi turn on and with ongoing data transmission|
|ON||Device has registered to the soft-switch, but without ongoing data transmission|
|OFF||Device is power off or not registered to the soft-switch|
|Blink||The port is with ongoing data transmission|
|ON||Port is connected properly.|
|Off||Port connection exception or not connected.|
|Blink||Port is sending or/and receiving data.|
|Pair(8)||Pair||ON||WPS client is connecting|
|OFF||Does not use WPS or WPS client is connected( LED turn off after 5 minutes of successful connection)|
|USB(9)||USB||ON||USB device is connected, but without ongoing data transmission|
|OFF||Device is power off or USB device is not connected|
|Blink||USB is with ongoing data transmission|