Erbium-Doped Fiber Amplifiers 4 8 16 32 64 Ports CATV High Power EDFA

• Customization: Available
• Certification: CE
• Condition: New
• Model NO.: SPA-16
• Brand: Softel
• Model Number: SPA-1550
• EDFA Application: Hfc, FTTX
• Power Supply: 220V or 110V
• Optical Connector: Sc/APC or FC/APC
• Wavelength: 1550±10nm
• Input Return Loss: ≥16(47~550MHz); ≥14(550~862MHz)
• Pump: Jdsu
• Lead Time: 5 Days
• Operation Bandwidth: 1545nm - 1565nm
• Power Source: 2
• Transport Package: Packed with Polyfoam, Double Packed with Brown Box
• Specification: CE; ISO9001
• Trademark: Softel
• Origin: Hangzhou, Zhejiang, China
• HS Code: 85176229
• Production Capacity: 5000PCS Per Month

Product Description

 
edfa catv high power edfa

SPA-XX is a low noise high-performance Er Yb co-doped fiber amplifier. Each output built-in CWDM (1310/1490/1550) wavelength division multiplexer. Conveniently multiplex the data stream of OLT and ONU to thefiber amplifier output by 1310nm and 1490nm optical connector. Thus reduced the equipment quantity, improved the system indexes and reliability. It is the ideal equipment for FTTx network, provides a flexible and low cost solution for the integration of three networks and the FTTH.

 

 

  

Item		Unit	Technique parameters
CATV pass through wavelength		nm	1545 - 1565
PON pass through wavelength		nm	1260 - 1360 1480 - 1500
PON insertion loss		dB	<0.8
Isolation		db	>15
CATV optical input power range		dBm	-3 - +10
Maximum optical output power		dBm	36
Output power stability		dBm	±0.5
Noise figure		dB	≤ 5.0 (Optical input power 0dBm, λ=1550nm)
Return loss	Input	dB	≥ 45
	Output	dB	≥ 45
Optical Connector Type			SC/APC
C/N		dB	≥ 50	Test condition according to GT/T 184-2002.
C/CTB		dB	≥ 63
C/CSO		dB	≥ 63
Power supply voltage		V	A: AC160V - 250V(50 Hz); B: DC48V
Consumption		W	≤ 70
Operating temperature range		°C	-10 - +42
Maximum operating relative humidity		%	Max 95% no condensation
Storage temperature range		°C	-30 - +70
Maximum storage relative humidity		%	Max 95% no condensation
Dimension		mm	483(L)× 440(W)× 88(H)

Features

1.Single/dual input for choice, built in optical switch for dual input, the switching power can be set by the button in the front panel or by web SNMP.
2.Output adjustable by buttons in the front panel or web SNMP, the range is down 4dBm

3.Maintenance function of one-time downward attenuation of 6dBm by buttons in the front panel or web SNMP, to facilitate the optical fiber hot-plug operation without turn off the device

4.Multi- ports output, can built in 1310/1490/1550WDM.
5.Standard RJ 45 port for remote control, we can provide output contract and web manager for choice, and also plug-in SNMP hardware can be reserved for update.

6.With laser key to turn on/off the laser.

7.With RF test function.
8.Adopts  JDSU or Oclaro Pump laser

 

9.Led displays the working condition of the machine

10.Dual power hot plug power supply for choice, 90V~250V AC or -48V DC

Installation
 

1.Please keep at least 1.75inches (4.5cm) space for cooling if the machine installed with other machines.
2.Please check the power supply socket and the grounding of the power supply, the grounding impedance should ≤4Ω, 220V power supply should be with three cables and the grounding cable should be in the middle, Unfitted grounding will damage the device or influence the signal quality.
3.Please make sure the power supply switch to off in the rear panel
4.Please confirm the fiber port is clean before connection the fiber.

FAQ

1. What are the payment terms that you support?
Usually, we accept T/T, PayPal, Western Union and so on. You can select the termsof payment which is more convenient for you.

2. What about the lead time?
Usually, if there's stock, we ship the goods within 3-5 working days after the deposit is confirmed. lf it is out of stock. the lead time depends.

3.How about the shipping?
When the package is small, we normally choose FedEx, DHL, TNT, and UPS and so on, while the goods have high weight and volume, we suggest using air or sea shipment.

4. How can I place an order?
(1) Negotiation is agreed upon for the product price and specifications.
(2) The Proforma invoice will be sent for confirmation.
(3)After the agreement on the proforma invoice, the customer makes the deposit
(4) Manufacturing will be started as soon as the payment is confirmed by our bank
(5) Ship out the goods within the agreed delivery deadline.

5.Can you do OEM for us?
Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you.

6.How about the Warranty?
There are 12 months for the warranty. While the warranty is not responsible for those broken by violence or updated with other brands.