Fiber Optical Transmitter Broadcast Equipment 1550 Transmitter

Product Description

Summary
It is important equipment to set up CATV HFC networks, and primarily used for TV video signal, digital TV signal, telephone voice signal and data (or compressed data) signal long-distance fiber transmission. The product use import high performance DFB laser transmitter as light source, RF drive adopts RF power digital automatic process technique and advanced RF pre-distortion circuit developed by our company and built-in perfect microprocessor automatic monitor system insure the excellent function of the product.





 
Characteristic
1 Dual Module RF drive, high efficiency laser pre-distortion adjustment
2 Full-automatically Optic Modulation Intensity (OMI) l,AGC&MGC control.
AGC status, input range is 78dBuV~88dBuV, system index is the best
MGC status, input range can be adjusted 75dBuV~90dBuV by the ATT on front panel
3 Front panel has 20 grade OMI status display(Modulation Depth)., intuitively adjust and display OMI normal (NOM) ,low( LOW) or high(HIGH)
AGC status, RF is fixed ,OMI is always at NOM status.
MGC status, OMI can be at NOM status by adjusting ATT.
4 Dual power supply inside backup. Full-automatically switch
One is working, the other as cool backup( suggested)
Both are working at the same time, one as hot backup, If one is damaged , switch to the other full- automatically .Switch time ≤10us.
5 Full- automatically control of casing temperature, ensure long life of the laser
Casing temperature is monitored and controlled by micro-processor. Display screen shows the actual operation temperature in time
When casing temperature≥45, Two fans at the back panel will open automatically to cool it by constraint
When casing temperature≤35, the transmitter will turn down automatically to ensure longer life of the fans.
6 Dual RF input port
AM interface input 59 routes PAL-D(47-550MHz)
Digital interface(-10dB) input digital video(550-750MHz)
7 Time locked function
SFT8300B , with time control and lock function, user can set the working time ( eg, 3 months ) by the software on the front panel. If exceeding the fixed time ,there will be alarm, only the password can turn on the machine again otherwise it will turn off automatically
Parameters
 

Performance			Index	Supplement
Optic feature	Laser wavelength(λ)	(nm)	1310±10
	Output power	(dBm)	4~24
	Return loss	(dB)	≥60
	Optic fiber connector		FC/APC	SC/APC
RF feature	Work bandwidth	(MHz)	45-862
	Input level	(dBmV)	15~25	AGC
	Flatness	(dB)	≤±0.75	45~862MHz
	Return loss	(dB)	>16	45~750MHz
	Input impedance	(Ω)	75
Link feature	Transmit channel		PAL-D/60ch	NTSC/80ch
	CNR	(dB)	≥52	10Km optic fiber,0dBm receive
	CTB	(dB)	≤-70
	CSO	(dB)	≤-63
General feature	Network interface port		RJ45,R232	Support I.E. & SNMP
	Power supply	(V)	90~265AC	-48VDC optional (30~60VDC)
	Power Consume	(W)	≤50	Single power works
	Work temp.	()	-5~65	Machine temp. control automatically
	Storage temp.	()	-40~85
	Work relative temp.	(%)	5~95
	Size	(")	19×14×1.75	(W)x(D)x(H)

 
Test Condition:
Test link path is formed of standard fiber and standard optical receiver. Under the condition of prescriptive link loss, laser transmitter modulation depth of each channel being 3.6%, set 59 PAL-D simulative TV channels signal at 47~550MHz and 33 QAM64 digital modulated signal at the range of 550~750(862) MHz, output level of digital modulated signal is lower 6dB than of simulative signal carrier wave.
 
Principle Drawing
 
 
5Order Direction
 
*Model nomination explanation please reference 1310nm laser transmitter equipment model nomination explanation .
 
6Accessories

Hangzhou Softel Optic Co., Ltd (Brand: SOFTEL) was established in 2005, which is located in Hangzhou Hi-Tech Development Zone. Taking advantages of the modern broadcast and optic fiber communication technology, we are specializing in R&D of CATV system equipment. We are a leading manufacturer of HFC broadband optic transmission equipment with strong R&D capability in this field. 

We have more than 100 staff in which 10% of senior technicians. With more than 1,000 square meters standards production assembling line, we have strict QC procedure. Each unit of our products will go through 3 layer QC procedures, material checking before production, stability and performance testing after production, packing checking before delivery. 

Currently, we supplying for numerous agents, integrated dealers and equipment producers all over the world. Most of our products are exported to South America, Russia and North European countries. 

Through keen international business competition in good faith, all of our staff members feel big accomplishment & work under heavy responsibility. In addition, we are much proud of providing our invaluable customers with our high quality, high reliability, high efficiency and competitive products.