4ge+1pots+WiFi6 (Dual Band) Dual Mode Hgu User Manual

• Customization: Available
• Type: Fiber Transceiver
• Wiring Devices: ODF
• Model NO.: ONT-4GE-VUW618
• Certification: CE, ISO
• Power Supply: DC 12V, 1.5A
• Dimension: 250mm*145mm*36mm(L*W*H)
• Net Weight: 0.34kg
• LAN Interface: RJ45 Connector
• USB Interface: USB 3.0, Transmission Rate: 4.8gbps
• Pots Interface: 1*RJ45 Connectors
• Management: Support Full Management
• Transport Package: Carton Packaging
• Trademark: SOFTEL
• Origin: Hangzhou
• Production Capacity: 10000PCS/Year

Product Description

4GE+1POTS+WiFi6(Dual Band)




DUAL MODE HGU USER MANUAL

 

 

 

 

1.Product OverView

Thank you for choosing the 4*LAN+ 1POTS+WiFi6 Home Gateway Unit. The terminal devices are designed  for  fulfilling  FTTH  and triple play  service  demand  of fixed network  operators  or  cable operators. The box is based on mature GPON and Gigabit EPON technology, which has high ratio of performance to price, and the technology of 802.11ax WiFi(2T2R), 802. 11n WiFi(2T2R), 802. 11ac WiFi(2T2R), Layer 2/3, and high quality VoIP as well. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And it is fully compliant with GPON and EPON technical regulations such as ITU-T G.984.x, IEEE802.3ah and technical requirement of EPON equipment from China Telecom. Dual mode HGU can detect and exchange PON mode automatically.

 

2.Product appearance features

3.Technical parameters

Technical items	Descriptions
PON interface	1GPON/EPON connector, SC single-mode/single-fiber. GPON: uplink 1.25Gbps, downlink 2.5Gbps; EPON: symmetric 1.25Gbps.
Wavelength	Tx1310nm,Rx 1490nm
Optical interface	SC/UPC connector.
Interface	4* 10/ 100/ 1000Mbps adaptive Ethernet interfaces, RJ45 connector. 1* POTS, RJ11 connector.
Wireless	Compliant with IEEE802. 11b/g/n/ac/ax, up to 1. 167Gbps, 4T4R(four external antennas).
LED	9 indicators, for status of POWER, PON, LOS, WAN, LAN, WIFI, POTS.
Operating condition	-5C~55C,10%~90%  (non-condensed)
Storing condition	-30C~60C,10%~90%  (non-condensed)
Power supply	DC 12V, 1.5A
Power consumption	≤12W
Dimension	250mm*145mm*36mm(L*W*H)
Net weight	0.34Kg

1. Panel lights

   Name	Status	Function
   WiFi	OFF	Device is power offor WiFi is turned off.
   	ON	WiFi is turned on.
   	Flash	WiFi is turned on and with ongoing data transmission.
   PHONE	OFF	Device is power off or not registered to the soft-switch.
   	ON	Device has registered to the soft-switch.
   	Flash	The port is working.
   WAN	OFF	Router mode WAN connection status is down.
   	ON	Router mode WAN connection status is up.
   PON/LOS	OFF	Device is not registered to OLT or received optical power is normal.
   	ON	Device has been registered to OLT.
   	Flash yellow	Device registered incorrect.
   	Flash red	Received optical power is lower than the sensitivity of the optical receiver.
   USB	OFF	Device is powered offor USB device is not connected.
   	ON	USB device is connected.
   	Flash	USB is with ongoing data transmission.

 

1. Interface description

   Name	Function
   DC 12V	Connect with power adapter.
   PON	Connect GPON or EPON port with internet by SC type, single mode optical fiber cable.
   RST	Press down reset button to make the device restart and recover from the factory default settings.
   WPS	Press down Wi-Fi WPS button for WPS function.
   LAN1-LAN4	Connect PC with HGU Ethernet port by RJ-45 CAT5 cable.
   FXS	Connect the telephone with FXS port by telephone wire.

 

1. Software function

   Parameters	Illustration
   Connection Name	This is the list table of WAN connection name. If you want to create a new WAN connection, please select "Add New Wan" and input other parameters at the same time and then click "Submit" button. If you want to edit WAN connection, please select the wan connect name you want to edit and change parameters and then click "Submit" button. If you want to delete one connection, please select the wan connection you want to delete and then click "Delete" button.
   Mode	Bridge: The LAN ports you have selected in this WAN connection and PON port are in the bridge mode.
   	Route: The LAN ports you have selected in this WAN connection and PON port are in the route mode
   IP Version	IPv4: WAN connections use IPv4 protocol. IPv6: WAN connections use IPv6 protocol.                                    IPv4 / IPv6: WAN connections use both IPv4 and IPv6 protocol.
   IP Mode	DHCP: Automatically obtain an IP address from your ISP Static: Set the IP address manually PPPoE: Select this option ifyour ISP uses PPPoE
   Enable Vlan	unchecked: In this wan  connection, the packets transmitted by the PON port without VLAN tag. checked: In this wan connection, the packets transmitted by the PON port with VLAN tag. Vlan ID: input the VLAN ID you want to set. 802.1p: select the port priority you want to set.
   MTU	MTU: max transfer unit. Default Value: 1492 in route PPPoE mode, 1500 in other modes
   NAT	checked: enable NAT function unchecked: disable NAT function
   Request DNS	Enable: DHCP server assigns DNS. Disable: set DNS manually
   Service Mode	Service mode indicates what the wan connection is used for. E.  g.: If this wan connection is used for VoIP, you should select the service mode which contains VOIP, such as                                             TR069_VOIP_INTERNET, TR069_VOIP, VOIP or VOIP  INTERNET. _
   Disable LAN DHCP	Checked: LAN DHCP will not work at the port which binds with the WAN. Unchecked: LAN DHCP will work at the port which binds with the WAN.
   Bind Port	Showing which LAN port or SSID the wan connection has included.