When ST15Ixx is applied in the multi-channel transmission, the laser's chirp effect will react with the link dispersion of the fiber. There will be distortion othe receiver. If working with the EDFA, there will be serious CSO deterioration. The distortion and deterioration will increase with the longer distance and more channels. 1550nm internal modulation CATV optic transmitter, has the chirp and dispersion compensation inside, and imthe system index greatly. It can be used in the town where the fund is shortage and the distance is less than 10Km as a transition solution.
Feature
Low chirp effect, high linearity DFB laser Dual Module therefore drive, chirp compensation Laser OMI AGC/MGC Intuitional modulation status display Dual power supply inside backup. Full-automatically swicth Full-automatically control of casing temperature
Parameter
erformance |
Index |
Supplement |
Optic feature |
Operating wavelength |
(nm) |
1540~1563 |
|
ITU-TG.692 |
|
Wavelength adjustable range |
(nm) |
±1.6 (±200GHz) |
|
Wavelength adjustable mode |
|
±0.05nm stepping |
|
Linewidth |
(MHz) |
≤1 |
FWHM(Δλ) |
Side mode suppression ratio |
(dB) |
≥45 |
SMSR |
Equivalent noise intensity |
(dB/Hz) |
≤-160 |
RIN (20~1000MHz) |
Output power |
(dBm) |
1×5 |
Optional 1×3, 1×6, 1×7 |
Return loss |
(dB) |
≥55 |
|
optical fiber connector |
|
SC/APC |
Optional FC/APC,LC/APC |
RF feature |
Work bandwidth |
(MHz) |
47-862 |
47~1000, 47~1080 optional |
Input level |
(dBmV) |
18~28 |
AGC |
Flatness |
(dB) |
≤±0.75 |
45~862MHz |
|
|
≤±1.5 |
862~1000MHz (optional) |
Return loss |
(dB) |
>16 |
|
Input impedance |
(Ω) |
75 |
|
RF port |
|
F-Female |
|
Link feature |
Transmit channel |
|
PAL-D/60CH |
PAL-D/99CH |
|
CNR1 |
(dB) |
≥52 |
≥50.5 |
Back to back |
CNR2 |
(dB) |
≥50.5 |
≥49 |
50Km optical fiber, 0dBm receive |
CTB |
(dB) |
≤-65 |
≤-65 |
|
CSO |
(dB) |
≤-65 |
≤-65 |
|
SBS restrain |
(dBm) |
13 |
|
General feature |
SNMP network management interface |
|
RJ45 |
|
Communication interface |
|
RS232 |
|
Power supply |
(VAC) |
90~265 |
50/60Hz |
(VDC) |
-48 |
30~72 |
Power Consume |
(W) |
≤50 |
Single power works |
Operating temp. |
(°C) |
0~50 |
Machine temp. control automatically |
Storage temp. |
(°C) |
-40~85 |
|
Operating relative humidity |
(%) |
5~95 |
|
Size |
(") |
19×14.5×1.75 (W)x(D)x(H) |
|
PARAMETERS FOR 2 OUTPORT
Performance |
Index |
Wavelength ADJ. Range |
(nm) |
±1.6 (±200GHz) |
Wavelength ADJ. Mode |
|
±0.05nm stepping |
Side mode suppression ratio |
(dB) |
≥45 |
Equivalent noise intensity |
(dB/Hz) |
≤-160 |
Input level |
(dBmV) |
18~28 |
Input impedance |
(Ω) |
75 |
RF connector |
|
F-Female |
SNMP NM interface |
|
RJ45 |
Communication interface |
|
RS232 |
Linewidth |
(MHz) |
Typ.=0.65 |
Output power |
(dBm) |
2*3,2*5, 2*6, 2*7, 2*9, 2*10, 2*11 optional |
Return loss |
(dB) |
≥50 |
Link feature |
Transmit channel PAL-D/60CH |
CNR1 |
(dB) |
≥53 |
CNR2 |
(dB) |
≥51.5 |
CTB |
(dB) |
≤-65 |
CSO |
(dB) |
≤-65 |
Transmit channel PAL-D/99CH |
CNR1 |
(dB) |
≥51.5 |
CNR2 |
(dB) |
≥49.5 |
CTB |
(dB) |
≤-65 |
CSO |
(dB) |
≤-65 |
SBS restrain adjustable |
(dBm) |
13~18 |
Optical fiber connector |
|
SC/APC |