Customization: | Available |
---|---|
Type: | Olt-G1V |
Condition: | New |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
OLT-40PON Technical Parameters | ||
Rack | ||
Demission | 482.6 mm (Length) x 333 mm (Width) x 221.5 mm (Height) | |
Weight | Rack(FAN+Back plane): 15kg CSM1A board: 0.7kg XGM2A board: 0.5kg GEM4A board: 0.5 kg ELM4A board: 0.5kg Power supply: 1kg |
|
Consumption | CSM1A: 65W(2*) ELM4A: 20W(10*) GEM4A:<10W(10*) XGM2A:<20W(2*) FAN1A:<36W(1*) PWA1A:<45W(2*) PWD1A(DC):45W(2*) Completely equipped 350W(two pieces of CSM, ten pieces of ELM4A, two pieces of PWD1A and one fan) |
|
Power supply | AC power supply slots, input voltage 110/220V DC power supply slots, input voltage -48V (-40V~-72V DC) |
|
The number of slots | Ten slots for service boards, 2 slots for CSM1A, 2 slots for power supply, one slot for fan. |
|
Console | Each CSM1A provide one RS-232 and one RJ-45 connector | |
GE board | Two kinds of uplink boards: two 10G ports or four 1GE ports. Support SFP module, and can use the electrical or optical module. | |
The number of EPON boards | At most support 10 pieces EPON boards, each board provides 4 PON ports | |
EPON OLT Port Capacity | At most 40 PON ports; at most support 2560 ONU if use PLC splitter 1:64. | |
EPON Standard | IEEE802.3ah | |
Fiber | SMF fiber, G.652 | |
EPON OLT Port connector | SC/SFP | |
Maximum splitting ratio | 1:64 | |
EPON link bandwidth | Uplink and downlink 1.25 Gbps | |
Estimated optical loss | 29dB, maximum distance 20km | |
Wavelength | Downlink: 1490 nm; Uplink: 1310 nm | |
ONU User Authentication | IEEE802.1x Radius authentication or the local authentication | |
DBA(Uplink) | The maximum bandwidth and assured bandwidth based on LLID | |
L2 Switch Function | ||
Switch Capacity | 176Gbps Full duplex line speed exchange | |
Nonblocking switch | High performance line speed forward and IP routing | |
Flexible MAC addresslearn | Independent VLAN learning (IVL) Address learn based on hardware L2 forwarding table based on software 32K L2 Unicast table |
|
VLAN | 802.1Q VLAN 4094 tagged (802.1Q) VLANs Entrance filter system based on 802.1Q QinQ(EPON chip is based on VLAN STACK of LLID) |
|
MSTP | IEEE802.1s, accord with STP,RSTP | |
Link Converge | IEEE 802.3ad | |
Package Mirror | Mirror based on the port: entrance, exit, entrance and exit | |
Package buffer and advanced flow control | HOL Jam prevention based on Cos Support back pressure Support suspended frame |
|
QoS | ||
CoS | Support at most 8 CoS queues at each output port Support 802.1Q priority, ToS/DSCP Supported queue system: Strict law, weighting method Support IPv4 TOS priority remapping Support IP Precedence, QoS Tag, DSCP |
|
Speed control of output port | Token bucket function from 1 Mbps~1 Gbps Broadcast, multicast and DLF speed control based on port |
|
Security | ||
Login | Use username and password | |
ACL | Strategy based on all kinds of protocol, source/target IP, source/target TCP/UDP port number and ToS combination Support permit, deny and ToS remarking |
|
L3 Route Proticol | ||
ICMP | RFC 0792, Internet Control Message Protocol. | |
ARP | RFC 0826, Ethernet Address Resolution Protocol. | |
Proxy ARP | RFC 1027, subnet gateway transparent application ARP | |
DHCP relay | RFC 3046, option 82 | |
DHCP server | RFC 2131,2132. At most 12k entry capacity, and 128 MAC address pool | |
IGMP | RFC 2236, Internet Group ManaXGM2Aent Protocol, Version 2 | |
Routing | Static IP Routing ( The default router) | |
Multicasting | IGMP Proxy | |
IGMP Snooping | ||
PIM SM | ||
Network Management | ||
CLI | Telnet or Console | |
FTP | RFC 959,File Transfer Protocol | |
Telnet | RFC 0854,Telnet Protocol Specification | |
SNMP | V2.0,Simple Network ManaXGM2Aent Protocol |