Wholesale Outdoor Bidirectional Distribution Amplifier CATV Signal Splitter Amplifier

Product Description

Outdoor Bidirectional Amplifier distribution amplifier/catv signal splitter amplifier

1. Product Summary
SA1200 outdoor bidirectional AGC trunk amplifier is a new high gain amplifier. Adopt mature and
optimized circuit design, scientific and rational internal process, high quality materials, and built-in
high performance AGC control circuit, to ensure the stable gain and low distortion. It's the first
choice equipment for large and medium-sized CATV bidirectional transmission network.
 
2. Performance Characteristics
It is more convenient to debug because of the plug-in duplex filter, fixed equalizer and
attenuator, plug-in output tap, and the scientific and reasonable on-line detection ports.
Built-in optimal designed high performance AGC control circuit, make the control more precise
and the signal operation more stable.
The equipment can long time continuous work steadily under outdoor bad environmental
condition. Because of the aluminum waterproof housing, high reliability switching power
supply and strict lightning protection system.
 

Item	Unit	Technical Parameter
Forward Path
Frequency range	MHz	47/85 ~860/1003
Rated gain (@FZ110)	dB	30	34		36	38
Min full gain (@FZ110)	dB	≥30	≥34		≥36	≥38
Rated Input Level	dBμV	72
Rated Output Level	dBμV	106/108
Flatness In Band	dB	±0.75
Noise Figure	dB	≤ 10
Return Loss	dB	≥ 16
ATT	dB	1-18 (Fixed, 1dB stepping, selectable)
EQ	dB	1-15 (Fixed, 1dB stepping, selectable)
C/CTB	dB	≥67		Test condition: 79 channels. Output level: 53MHz/550MHz/750MHz. 99dBuV/105dBuV/108 dBuV
C/CSO	dB	≥69
AGC Pilot Frequency	MHz	168.25 (Or specified by the user)
AGC Characteristic	dB	±4 (input) /±0.5 (output)
Group Delay	ns	≤ 10  (112.25 MHz/116.68 MHz)
Signal to Hum Ratio	%	< 2
Gain Stability	dB	-1.0 ~ +1.0

 

 

Return Path
Frequency Range	MHz	5 ~ 42/65
Rated Gain (@FZ110)	dB	12	16	20	24
Max Output Level	dBμV	≥ 110
Flatness In Band	dB	±0.75
Noise Figure	dB	≤ 12
Return Loss	dB	≥ 16
Carrier to Second Order Inter-modulation Ratio	dB	≥ 52	Test condition: output level 110dBμV, Test points: f1=10MHz, f2=60MHz, f3=f2-f1=50MHz
Group Delay	ns	≤ 20  (57MHz/59MHz)
Signal to Hum Ratio	%	< 2
General Characteristic
Characteristic Impedance	Ω	75
Test Port	dB	-20±1
Power Voltage	V	A:AC(135 ~ 250)V;B:AC(35 ~ 90)V
Impulse Withstand Voltage (10/700μs)	kV	> 5
Power Consumption	W	22
Dimension	mm	260(L)*200(W)* 130(H)