| Customization: | Available |
|---|---|
| Type: | Optical Network Unit(ONU) |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2GE+1POTS+WiFi GPON/EPON HGU WiFi Mesh terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators. These boxes are based on the mature Chipset (Realtek) technology, which have high ratio of performance to price, and the technology of IEEE802.11b/g/n/ac WiFi, Layer 2/3, Wi-Fi CERTIFIED ™ EasyMesh,and high quality VoIP as well. Support full management of HGU devices through OLT. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulations such as IEEE802.3ah , ITU-T G.984.x and technical requirement of GPON Equipment from China Telecom.
ONT-2GE-V-DW-MESH Support Wi-Fi CERTIFIED EasyMesh™ that brings a standards-based approach to Wi-Fi networks that utilize multiple access points (APs), combining the benefits of easy to use, self-adapting Wi-Fi with greater flexibility in device choice that comes with interoperable Wi-Fi CERTIFIED™ devices.
| Technical item | 2*GE+1*POTS+WiFi |
PON interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| Wavelength | Tx1310nm,Rx 1490nm |
| Optical interface | SC/UPC connector |
LAN interface |
2*10/100/1000Mbps auto adaptive Ethernet interfaces, Full/Half, RJ45 connector |
| USB interface | USB 3.0, Transmission Rate: 4.8Gbps |
POTS interface |
1 x RJ11 connectors G.711A/G.711U/G.723/G.729 Codec,T.30/T.38/G.711 Fax mode, DTMF Relay |
WiFi interface |
Compliant with IEEE802.11b/g/n/ac 2.4GHz Operating frequency: 2.400-2.483GHz (WiFi 4) 5.0GHz Operating frequency: 5.150-5.825GHz (WiFi 5 wave 2) WiFi:4*4 MIMO,,5dBi antenna, rate up to 1.167Gbps,Multiple SSID TX power: 11n--22dBm/11ac--24dBm |
| LED | 5, For Status of PON/LOS, WiFi,TEL,LAN1,LAN2 |
Operating Enviroment |
Temperature: 0ºC~+50ºC Humidity: 10%~90%(non-condensing) |
Storing Enviroment |
Temperature: -30ºC~+60ºC Humidity: 10%~90%(non-condensing) |
| Power Supply | DC 12V/1.5A,12W |
| Dimension | 115mm×115mm×180m(L×W×H) |
| Net weight | 625g |
PON/LOS bi-colourled |
1.Blinking red LED On:PON initialization completed, but no light in Fiber. 2.Green LED On:ONT-2GE-V-DW-MESH has been registered to the OLT. 3.Orange LED On:Power On. 4.No LED:Power Off. |
||
| LED | ON | Blink | OFF |
TEL |
Device has registered to Soft-switch,No Data transmission |
Phone hooks off or the port is with ongoing data transmission |
Device is power off or not registered to the Soft-Switch |
| WiFi | WiFi Turn On | WiFi Turn On with ongoing data transmission |
Devide is Power Off or WiFi Turn Off |
| LAN1,LAN2 |
Port is connected properly |
Port is Sending/Receiving Data |
Port connection exception or not connected NA User is accessing User is logged in User has no access |
| Port Type | Function |
PON |
Connect PON port with internet by SC/APC type, single mode optical fiber cable. |
| LAN 1/2 | Connect device with ethernet port by RJ-45 cat5 cable. |
| RST | Press down reset button and keep about 5seconds to make the device restart and recover from the factory default |
| DC12V | Connect with power adapter. |
Round Button |
Press button quickly to form a network with other mesh devices. |
| Fuction | Description |
Management Mode |
OAM/OMCI,Telnet,WEB,TR069 Support full management of HGU functions by VSOL OLT |
Data Service Functions |
Full speed non-blocking switching 2K MAC address table 64 full range VLAN ID Support QinQ VLAN, 1:1 VLAN, VLAN reusing, VLAN trunk, etc Integrated port monitoring, port mirroring, port rate limiting, port SLA, etc Support auto polarity detection of Ethernet ports (AUTO MDIX) Integrated IEEE802.1p QoS with four level priority queues Support IGMP v1/v2/v3 snooping/proxy and MLD v1/v2 snooping/proxy Support bridge, router and bridge/router mixed mode IP address assignment: dynamic PPPoE/DHCP Client and static IP |
| Integrated 802.11b/g/n/ac | |
| Support max 128 users | |
| WiFi Service | Support Wi-Fi CERTIFIED EasyMesh |
| Functions | Authentication : WEP/WAP-PSK(TKIP)/WAP2-PSK(AES) |
| Modulation type: DSSS,CCK and OFDM | |
| Encoding scheme: BPSK,QPSK,16QAM and 64QAM | |
| POTS Service Function | Call protocol: SIP(IMS compatible) seamless compatible with all popular call agent Integrate heartbeat function and support active/standby call agent Voice coding: ITU-T G.711/G.722/G.729, auto-negotiate with call agent Echo cancellation exceeding ITU-T G.165/G.168-2002, up to 128ms tail length Support high/low speed fax, bypass fax, and T.38 fax Support high speed MODEM(56Kbps) dial access Support RFC2833 and redundant RFC2833, difference rings, MD5 authentication, call forward, call waiting, hot-line call, alarm clock, and all kinds of value-added voice service Multi-party conferencing Call loss less than 0.01% |
1. What are the payment terms that you support?
){kind=link}