Customization: | Available |
---|---|
Type: | Optical Receiver |
Wiring Devices: | ODF |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.High response PIN photoelectric conversion tube
2.Optimized circuit design, SMT process production, optimized signal path, make the photoelectric signal transmission more smooth
3.Specialized RF attenuation chip, with good RF attenuation and equilibrium linear, high accuracy.
4. GaAs amplify, power double output, high gain and low distortion.
5.Single Chip Microcomputer (SCM) control equipment working, LCD display the parameters, convenience and intuitive operation, and stable performance
6.Excellent AGC performance, when the input optical power range is -9~+2dBm, the output level keep unchanged, CTB and CSO basically unchanged
7.Reserved data communication interface, can connect with the Ethernet transponder, access to network management system
8.Return emission can select burst mode to sharply decrease the noise convergence and reduce the forepart receiver number.
Parameter:
Item | Unit | Technical Parameters | |||
Forward optical receiving part | |||||
Optical Parameters | |||||
Receiving Optical Power | dBm | -9 ~ +2 | |||
Optical Return Loss | dB | >45 | |||
Optical Receiving Wavelength | nm | 1100 ~ 1600 | |||
Optical Connector Type | FC/APC, SC/APC or specified by the user | ||||
Fiber Type | Single Mode | ||||
Link Performance | |||||
C/N | dB | ≥ 51 (-2dBm input) | |||
C/CTB | dB | ≥ 65 | Output Level 108dBμV EQ 6dB |
||
C/CSO | dB | ≥ 60 | |||
RF Parameters | |||||
Frequency Range | MHz | 45 ~862 | 45 ~1000 | ||
Flatness in Band | dB | ±0.75 | ±0.75 | ||
Rated Output Level | dBμV | ≥ 108 | ≥ 108 | ||
Max Output Level | dBμV | ≥ 114 | ≥ 112 | ||
Output Return Loss | dB | (45 ~550MHz)≥16/(550~1000MHz)≥14 | |||
Output Impedance | Ω | 75 | 75 | ||
Electronic Control EQ Range | dB | 0~15 | 0~15 | ||
Electronic Control ATT Range | dB | 0~20 | 0~20 | ||
Return Optical Emission Part | |||||
Optical Parameters | |||||
Optical Transmit Wavelength | nm | 1310±10, 1550±10 or specified by the user | |||
Output Optical Power | mW | 0.5, 1, 2 | |||
Optical Connector Type | FC/APC, SC/APC or specified by the user | ||||
RF Parameters | |||||
Frequency Range | MHz | 5 ~ 65 (or specified by the user) | |||
Flatness in Band | dB | ±1 | |||
Input Level | dBμV | 72 ~ 85 | |||
Output Impedance | Ω | 75 | |||
NPR Dynamic Range | dB | ≥15 (NPR≥30 dB) Use DFB laser |
≥10 (NPR≥30 dB) Use FP laser |
||
General Performance | |||||
Supply Voltage | V | A: AC (150~265)V; B: AC (35~90)V | |||
Operating Temperature | ºC | -40~60 | |||
Storage Temperature | ºC | -40~65 | |||
Relative Humidity | % | Max 95% no condensation | |||
Consumption | VA | ≤ 22 | |||
Dimension | mm | 260(L)* 200(W)* 130(H) |