Customization: | Available |
---|---|
Type: | CATV Equipment |
Certification: | CE, ISO |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. Summary
SA801H Indoor Bi-directional Amplifier are special amplifiers designed for the last "1km" of the bi-directional transmission network. Special CATV RF modules are used as forward channel; Microwave tube push-pull circuit with low noise are used as backward channel; It has the characteristics of low power consumption,high reliability and excellent cost performance. And it is suitable for small and medium sized CATV bi-directional transmission network.
2. Performance Characteristics
Microwave tube push-pull circuit with low noise or special CATV RF modules packaged in SOT-115 are used as forward channel whose output level is stable and nonlinear indicators are good; Microwave tube push-pull circuit are used as backward channel whose distortion is low and signal-to-noise ratio is high.
It is more convenient for debug engineering debug, because of the plug-in diplexer filters with built-in adjustable equalizers, adjustable attenuator, plug-in output splitter and scientific and reasonable ports for online test.
These equipment will work in the field rugged environment for a long time continuously, because of the aluminum alloy casing, good heat dispersing performances, beautiful looks, dependable linear power supply and lightning protection systems.
3. Technical Parameters
Item |
Unit |
Technical Parameter |
|
SA801H-00 |
SA801H-15 |
||
Downlink Transmission Path |
|||
Frequency Range |
MHz |
47/87~862 |
|
Nominal Gain |
dB |
32 |
|
Minimum Full Gain |
dB |
≥32 |
|
Nominal Input Level |
dBμV |
70 |
|
Nominal Output Level |
dBμV |
102 |
|
Flatness in Band |
dB |
±0.75 |
|
Noise Figure |
dB |
≤10 |
|
Return Loss |
dB |
≥16 |
|
C/CTB |
dB |
≥ 57 |
|
C/CSO |
dB |
≥ 56 |
|
Group Delay |
ns |
≤ 10 (112.25 MHz/116.68 MHz) |
|
Signal to Hum Noise Ratio |
% |
< 2 |
|
Gain Stability |
dB |
-1.0 ~ +1.0 |
|
Uplink Transmission Path |
|||
Frequency Range |
MHz |
5 ~ 30/65 |
5 ~ 30/65 |
Nominal Gain |
dB |
-3 |
15 |
Minimum Full Gain |
dB |
- |
≥15 |
Maximum Output Level |
dBμV |
- |
≥110 |
Flatness in Band |
dB |
±0.75 |
±0.75 |
Noise Figure |
dB |
- |
≤12 |
Return Loss |
dB |
≥16 |
≥16 |
Carrier to Double Inter-modulation Ratio |
dB |
- |
≥ 52 |
Group Delay |
ns |
≤ 20 (57MHz/59MHz) |
≤ 20 (57MHz/59MHz) |
Signal to Hum Noise Ratio |
% |
<2 |
<2 |
General Characteristic |
|||
Characteristic Impedance |
Ω |
75 |
|
Supply Voltage |
V |
A:AC(165 ~250)V |
|
Impulse Withstand Voltage(10/700μs) |
kV |
> 5 |
|
Power Consumption |
W |
8 |
|
Outside Dimension |
mm |
150(L)x 108(W)x 54(H) |